Home

Question 1

How does the die-cut insert hold a keychain in place?

Accepted Answer

The insert is die cut to the outline of your keychain, so the piece sits in a fixed position rather than sliding loose inside the box. That precise fit protects it from knocks in transit and presents it squarely the moment the box is opened.

Question 2

What box styles are available for keychain packaging?

Accepted Answer

Rigid shells, chipboard gift boxes, recycled cardboard and paper, and cloth covered in leather for a high-end keychain. Structurally you can specify two sliders, a hinged lid or another design, and keychain storage containers suit a collection that needs showcasing rather than gifting.

Question 3

Can a keychain box be printed with a window?

Accepted Answer

Yes. Window patching is one of the available add-ons and it works well where keychains from different eras or collections need displaying in an organized way. Die cuts, gloss finishes, embossing, debossing and gold foiling can be applied alongside it.

Question 4

How does ballot packaging guard against tampering?

Accepted Answer

It is built from stiff, secure stocks such as sturdy cardboard or Bux board that will not flex, so the pack stays intact through handling and transport and resists damage and unauthorized access. Printing to an official standard is part of the same job, because voters have to trust the box on sight.

Question 5

What is the difference between C1S and C2S coated stock?

Accepted Answer

C1S is coated on one side and C2S on both. Either adds a glossy or matte finish and a polished, professional look. Lamination goes further: gloss for shine, matte for a subdued effect, aqueous for protection against moisture and wear, and soft-touch for a velvet-like texture.

Question 6

Should ballot boxes be printed in CMYK or PMS?

Accepted Answer

CMYK reaches the broadest spread of colors, so it suits imagery and full-color artwork. PMS matches one specific color exactly, which is what keeps an organization’s color consistent across the ballot packaging and every other branded item it sits beside.

Question 7

Do hairspray boxes come with a carry handle?

Accepted Answer

Yes. A handle is fitted to the top of the box as standard, so a customer can carry the hairspray out of the store comfortably without needing a separate bag for it.

Question 8

Is kraft or cardboard the better stock for a hairspray box?

Accepted Answer

Kraft is the eco-friendly choice and is durable enough for a bottle that gets picked up and put down repeatedly. Cardboard is the sturdier build and carries bold printing best. Both stocks are eco-friendly, which matters for a haircare line whose buyers already read the label.

Question 9

What can be customized on a hairspray box?

Accepted Answer

Color scheme, size and shape, design and logo placement, paper type, coating and printing. The box is built around the aerosol bottle going inside it rather than adapted from a stock size, so the fit is right from the first sample.

Question 10

How do delivery boxes show whether a parcel has been opened?

Accepted Answer

Adhesive strips and interlocking flaps do that job, and both make it visible if a parcel has been opened along the way. They work alongside the closure mechanism that keeps the box shut from dispatch through to the doorstep.

Question 11

What sizes do delivery boxes come in?

Accepted Answer

They run from small parcel and fragile sizes up to large formats, so the box fits the product rather than the other way round. A snug fit minimizes movement inside the box, and movement in transit is what breaks things. The boxes are also stackable, which uses space better in storage and on a vehicle.

Question 12

Which products are these delivery boxes suited to?

Accepted Answer

Clothing and apparel, electronics, cosmetics, food items, and small products, fragile items and parcels of every size. Reinforced corners cover the point where damage in transit usually starts, which is the corner that takes the drop.

Question 13

What makes a luxury pillow box different from a standard one?

Accepted Answer

The structure is the same curved box. What changes is the stock, the print, and the finish, so heavier board, tighter color control, and a gloss, matte, or spot UV treatment that makes the box read as part of the gift.

Question 14

What fits inside a luxury pillow box?

Accepted Answer

Small and light is the rule. Chocolates, candies, jewelry, soaps, small cosmetics, and wedding or party favors all sit well. Anything heavy or awkwardly shaped needs a sturdier structure instead, since the curved panels are not built to carry weight.

Question 15

What products suit a pillow box with a window?

Accepted Answer

Candies, jelly sweets, and chocolates are the most common, since the product itself does the selling. Light jewelry, cosmetics, and small electronics also work. The limit is weight rather than size: the curved panels give plenty of room, but heavier items want corrugated stock underneath them.

Question 16

How do the dividers inside a CBD pre-roll box work?

Accepted Answer

Each divider creates its own channel, so the rolls sit apart instead of pressing against one another in transit. We cut the channel width to the diameter you actually fill, and the count per box follows from that. Inserts can replace dividers where you want the rolls seated deeper.

Question 17

Can the box be sized for a specific pre-roll count?

Accepted Answer

Yes. Sizes and styles are cut to the count you sell rather than picked from a fixed list, so a two-roll pack and a ten-roll pack each get their own dieline. Send us the roll diameter, the length, and the count, and the structure comes back built around those numbers.

Question 18

What printing and finishing options are available?

Accepted Answer

CMYK and PMS inks cover process photography and exact brand colors. On top of that you can add metal foil stamping, raised ink printing, die-cut cutout shapes that expose the rolls, and surface coatings that finish the panel. They combine, so a foil logo over a coated panel is a normal request.

Question 19

Do brand product trays arrive assembled?

Accepted Answer

They ship flat and fold up on site. The grooved creases do the work, so a member of your counter staff can set one up in seconds without tape or tools. Shipping flat also keeps your shipping cost per tray down on a full order.

Question 20

Should I choose cardboard or kraft paper for a product tray?

Accepted Answer

Cardboard takes full-color print well and suits a tray that has to carry bold artwork on a bright counter. Kraft paper gives you an uncoated, natural look that suits food, handmade, and artisan lines. Both hold the same shape; the choice is about how you want the tray to read.

Question 21

Can I get a product tray sized to my own product?

Accepted Answer

Yes. Every tray is cut to your dimensions rather than picked from a stock range. Tell us the size of the item, how many you want on display at once, and how much of each one should stay visible, and we will set the footprint and wall height from that.

Question 22

Can consumer tray boxes take custom inserts?

Accepted Answer

Yes, and on multi-item sets they are worth the money. An insert cut to your product keeps each piece separated and upright, so nothing slides into a corner while the tray sits on display. Send us the item dimensions and we will cut the seats to match.

Question 23

How do I keep fragile art supplies safe in a subscription box?

Accepted Answer

Start with the board. E-flute corrugated absorbs more of a knock than a plain paper stock, and compartments stop items sliding into each other in transit. For prints and flat artwork, a snug internal fit matters more than a thicker wall, because movement is what causes creasing.

Question 24

Which box style suits an art subscription?

Accepted Answer

Tuck-end styles suit lighter monthly kits and open cleanly on a table. Mailer styles suit heavier assortments and anything going through a courier network unboxed, because the walls are doubled where the box takes the most handling. We build both to your dimensions.

Question 25

Can an art subscription box have a window?

Accepted Answer

Yes. Window patching lets a print or a signature item show before the box is opened, which is useful if the box is also sold on a shelf rather than only shipped. Tell us which item should be visible and we will set the opening around it.

Question 26

How do I stop a mixed craft assortment moving around in the box?

Accepted Answer

Use compartments or a fitted insert rather than a bigger box with more void fill. Each item gets its own seat cut to its shape, so nothing slides, nothing rubs against a neighbouring item, and the assortment still looks arranged when the subscriber lifts the cover.

Question 27

How is white kraft different from brown kraft?

Accepted Answer

It is the same material with a bleached surface. The strength and the recyclability stay, but artwork prints against white instead of tan, so colors land where you expect them. Brown suits a rustic look; white suits anything where the printing has to carry the design.

Question 28

Can white kraft boxes be used for food?

Accepted Answer

Yes, and they already are, most visibly as pizza boxes. For direct contact with food we specify the right coating on the inner face. Tell us what is going in the box and the stock is chosen around it rather than assumed.

Question 29

What finishes work on white kraft boxes?

Accepted Answer

Embossing, foiling, coating, and die-cut windows all run on white kraft, and ribbons or bows can be added as a finishing touch. The bright surface shows foil and emboss detail more sharply than brown board does, which is why jewelry packaging tends to start here.

Question 30

Why order roll labels instead of sheet labels?

Accepted Answer

Speed of application. Roll labels come wound in sequence and feed off a dispenser or into an applicator, so a run of several hundred takes minutes rather than an afternoon. Below about a hundred units the difference hardly matters, but past that it is the whole reason rolls exist.

Question 31

Should I choose permanent or removable adhesive?

Accepted Answer

Permanent, if the label should stay put for the life of the product and any attempt to peel it is a warning sign. Removable, if the container gets reused, refilled, or relabeled, or if a customer may want the label off. Tell us which applies and the stock is matched to it.

Question 32

What materials can roll labels be printed on?

Accepted Answer

Paper for dry goods, plastic and vinyl where damp and handling are involved, clear film for a no-label look on see-through containers, and silver or gold foiled paper for premium lines. Food and beverage runs use stock that resists water, heat, and oil.

Question 33

What is private label packaging?

Accepted Answer

It is packaging that carries your brand on a product manufactured by someone else. The contents may be identical to a competitor’s; the box, the label, and the finish are what make it your product in the customer’s mind, which is why the packaging decisions matter more here than in most categories.

Question 34

What materials do you use for private label packaging?

Accepted Answer

Cardboard, cardstock, and kraft cover most private label work. Cardboard gives structural strength for larger retail packs, cardstock takes a crisp print on smaller ones, and kraft suits lines positioned as natural or sustainable.

Question 35

What finishes are available on private label packaging?

Accepted Answer

Metallic foiling, embossing and debossing, bows and ribbons, and a choice of laminations for the surface. On a private label product these carry more weight than usual, since the finish is doing the work of signalling quality that the contents cannot do on the shelf.

Question 36

How long do vinyl stickers last outdoors?

Accepted Answer

Long enough that fading is rarely what ends them. Vinyl resists UV, moisture, tearing, and extreme temperatures, so an outdoor sticker generally comes off because the campaign changed, not because the sticker gave up. A lamination over the print extends that further.

Question 37

Do vinyl stickers come off cleanly?

Accepted Answer

Yes. Application is straightforward and removal is clean, which matters on windows and vehicle panels where residue is a real nuisance to remove. If a sticker is meant to be temporary from the start, tell us and we specify the stock accordingly.

Question 38

What finishes can go on vinyl stickers?

Accepted Answer

Gloss for shine and saturation, matte for a quieter look, aqueous for protection without much visual change, and soft-touch for a velvet-like texture. Embossing and debossing are also available where you want part of the design to stand off the surface or press into it.

Question 39

What is white label packaging?

Accepted Answer

Packaging a manufacturer produces without its own brand on it, so the seller who buys the product can apply theirs. The box carries the structure, the product protection, and the compliance copy; a deliberately blank area is left for the reseller mark.

Question 40

How is white label different from private label?

Accepted Answer

White label means one standard product sold on to several brands, each adding their own mark to the same packaging. Private label means packaging built for one brand alone. If you expect multiple resellers to carry the same item, white label is the cheaper route.

Question 41

Can white label boxes still be finished?

Accepted Answer

Yes, and most are. Embossing, debossing, foil stamping, UV spot, and holography all work on white ground stock, and they usually surround the blank area rather than sit inside it, so the reseller mark stays the focus.

Question 42

What fits inside a pyramid box?

Accepted Answer

Small, light contents: chocolates, candies, tea bags, small cosmetics, and stationery. The shape tapers toward the point, so usable volume sits in the lower half. Send the dimensions of the widest item going in and we will size the box around it.

Question 43

Can pyramid boxes have windows?

Accepted Answer

Yes. Cutout windows can be placed on one panel or several, so the contents are visible without opening the box. On a favor run that usually earns its keep, since the product itself does the selling on a display table.

Question 44

Which finish suits a pyramid box best?

Accepted Answer

It depends on the light. A pyramid presents four angled faces at once, so gloss and metallic foiling catch the light from several directions, while matte keeps the surface even and lets embossing or raised ink carry the detail instead.

Question 45

What is the clear lid on the box made from?

Accepted Answer

A clear cellophane sheet set into a window cut in the lid. It gives a clean view of the product while keeping dust off it, and it can be cut to any shape you want rather than only a rectangle in the middle of the panel.

Question 46

What products suit clear lid boxes?

Accepted Answer

Small food items, greeting cards, cosmetics, stationery, bath items and gift sets. The format earns its place wherever the look of the product does the selling, since the buyer sees it from the shelf without opening anything.

Question 47

Can the inside of the box be dressed up?

Accepted Answer

Yes. Paper shred inside the base fills the space and frames the product under the window, and ribbons and bows finish the exterior. Both are worth specifying with the order so the box arrives ready to pack rather than needing assembly.

Question 48

What are bux board boxes used for?

Accepted Answer

They package consumer goods for the retail marketplace and for delivery to the end customer. The stock has the strength to protect merchandise through transport and handling, and it prints well enough that the same box works on a shelf without a second outer package.

Question 49

What finishes can I add to a bux board box?

Accepted Answer

Embossing, gold and silver foiling, and lamination, in any combination. HD printing runs underneath all of them, so a logo can be printed, embossed, and foiled on the same panel. Lamination also seals the surface, which helps the box hold up through repeated handling.

Question 50

Can I order bux board boxes in a custom size and shape?

Accepted Answer

Yes. Size, shape, color, and design are all yours to set. Send dimensions and artwork, or share the idea and our graphic designers will build the layout with you. A 3D mockup goes out for approval before the run starts, so you see the finished box first.

Custom packaging, engineered for manufacturers.

Trending & Popular Products

Subscription Boxes For Women

Auto Lock Boxes

Double Wall Tuck Top Boxes

Holographic Foiling Boxes

Dessert Boxes

Burger Boxes

Ecofriendly Kraft Boxes

Custom Juice Boxes

Looking for other custom boxes and packaging?

Find Custom Boxes for Your Industry

Retail

Food & Restaurant

Cosmetics

Gift

CBD

Fast & Reliable Custom Packaging Boxes

Starting from 500 Boxes

Competitive Pricing

Custom Design, Sizes & Style

High-Quality Offset Printing

Fast Turnaround: 8–10 Business Days

How EdgeCraft Packaging Brings Your Packaging Design Ideas to Life

Choose Your Custom Shipping Boxes

Request Your Free Custom Quote

Finalize Your Order

Roll-on production!

Empowering Brands in Every Industry with Unrivaled Custom Boxes

Bakery

Electronics

Cosmetics

Apparel & Fashion

Candy & Sweets

Pharma

Coffee & Tea

Marijuana & Cannabis

Get Creative Packaging Design Inspiration

Procurement Teams Keep Coming Back

Frequently Asked Questions

Can you design my custom boxes?

Do you offer bulk order discounts?

What is your typical turnaround time?

How do I place an order with you?

Can you print inside and outside the box?

How do I get a free quote, and how fast?

Will I see a proof before printing?

Get in Touch for a Consultation

Learn About Custom Boxes from the Pros

Ready to think outside the box? Let’s get started!